This article was co-authored by Alexandra Kah.

On 6 May 2026, the NSW Government introduced the Building (Approvals and Practitioners) Bill 2026 (NSW)(the Bill) to Parliament. The Bill proposes a significant overhaul of the State's building regulatory framework, positioning itself as a productivity reform that maintains, and in some respects strengthens, building quality and safety standards. The Bill proposes to:

  • replace the existing certification system (construction certificates and occupation certificates) with a new approvals framework;
  • consolidate the State's complex and fragmented building regulatory framework into a single legislative regime;
  • expand regulation of practitioners, including registration and disciplinary oversight; and
  • support modern methods of construction.

This update summarises the key changes and their implications for industry participants.

Overview of key reforms

New approvals framework

The Bill proposes to establish a modern, digitally focused building approvals system to replace the current certification requirements under Part 6 of the Environmental Planning and Assessment Act 1979 (EP&A Act). A new single "approval authority" (typically a local council or registered practitioner) will be nominated through the NSW Planning Portal for each project. The framework introduces two core approval types: a "building approval" (authorising building work) and a "completion approval" (signalling that work is finished and the building may be occupied) to replace the current requirements to obtain a construction certificate and an occupation certificate.

Critically, the Bill proposes to formalise staged building approvals, enabling early works approvals for excavation and piling to proceed while later design stages are resolved. It would also empower the approval authority to consent to minor variations without requiring applicants to return to the original consent authority for a modified development consent, a longstanding pain point for industry.

Registration of building professionals

Part 4 of the Bill proposes to create a single, consolidated registration framework for practitioners performing "registered work", including certifiers, professional engineers, and design and building practitioners. If enacted, this would replace the fragmented arrangements under the Design and Building Practitioners Act 2020 (NSW) (DBP Act) and the Building and Development Certifiers Act 2018 (NSW).

Repeal of the DBP Act

The Bill proposes to integrate the design and declaration requirements of the DBP Act into the new approvals system, ensuring that critical building elements, such as structure, enclosure, fire safety systems and waterproofing, continue to be designed by suitably registered practitioners. The consolidation removes duplicative design requirements.

Amendments to the RAB Act

The Bill proposes to amend the Residential Apartment Buildings (Compliance and Enforcement Powers) Act 2020 (NSW) (RAB Act) to introduce a new head of power for dispute resolution, recognising that too many building disputes result in drawn-out and expensive legal proceedings. If the Bill is enacted, regulations will be developed in consultation with consumer groups and industry to establish a structured dispute resolution process for occupied apartment buildings.

Modern methods of construction

The Bill proposes to formally recognise prefabricated buildings in legislation for the first time, making New South Wales the first Australian jurisdiction to define "prefabricated buildings" in law, integrate modern methods of construction (MMC) into the approvals system, and guarantee consumer protections for these building types. The Commonwealth Productivity Commission has estimated that MMC can reduce overall construction costs by up to 20% and deliver homes up to 50% faster. Further, provisions enabling the Crown to carry out prefabricated building work will commence on assent, accelerating delivery of social housing.

Statutory duty of care: status quo maintained

Part 8 of the Bill reproduces the statutory duty of care established under the DBP Act. The NSW Government has expressly stated in the second reading speech that the Bill "seeks to uphold the existing operation, application and interpretation of the duty" and that "now is not the right time to overhaul our established duty of care system for construction". The duty will continue to apply broadly to work on "buildings" as defined in the EP&A Act and will not be limited to class 2, 3 and 9c buildings. Practically, this means building professionals and developers should not expect any change to their existing exposure under the duty of care regime, including the long-stop limitation period for defective building work claims, which is re-established in Part 9.

Other positive impacts

If enacted, the Bill will deliver a number of additional benefits for the construction sector, including:

  • clearer conflict of interest provisions for certifiers, with maximum penalties increasing from $33,000 to $1.1 million, plus automatic suspension upon conviction;
  • streamlined processes eliminating duplicative administrative steps inherited from the paper-based system introduced last century;
  • a digitally designed system operating through the NSW Planning Portal, reducing double handling and creating a single source of truth for industry, consumers and regulators; and
  • a new obligation on all persons to take reasonable steps to ensure building work complies with the Building Code of Australia.

Next steps

If passed, the bulk of the Bill will commence on a date to be proclaimed. Regulations supporting the Bill are expected to be developed through 2026–2027, with implementation anticipated from 2027. The NSW Government has confirmed that key elements of the Bill will not commence until the regulations are developed and approved.

If the Bill is passed, clients developing projects through this transition period should:

  • identify whether the project will proceed down the current certification regime or the new regime;
  • review current contractual frameworks with consultants, builders, lenders and insurers to ensure they are capable of accommodating the new approval processes once in force, as the project completion regime, financing arrangements and sunset clauses will be predicated on the existing certification regime;
  • if relevant, ensure that designs, documents and declarations prepared to comply with the DBP Act will be sufficient to comply with the new approvals system; and
  • explore whether the project could benefit from the introduction of staged approvals, allowing for earlier occupation of parts of the projects.

We will continue to monitor the Bill's progress through Parliament and the development of the supporting regulations. Please contact our Projects and Construction team if you have any questions about how these reforms may affect current or planned projects.

You can access the Bill, second reading speech and media release here:

Bill

Second reading speech

NSW Government media release

card-grid-item, aem-sourced
Projects NewsWire Australia
This series includes insights into significant market, policy and project related developments from our highly experienced team.
https://web.nortonrosefulbright.com/Projectnewswiresubscriptionpage

Contact