Since its introduction to Parliament on 14 October 2026, the Building Safety (Remediation of Unsafe Cladding etc.) Bill (the Remediation Bill) has generated significant interest. But what is behind the headlines? We explore some of the Remediation Bill's key proposals and their potentially far-reaching implications for the construction industry and the wider community.
Why do we need the Remediation Bill?
While the building safety reforms introduced in response to the Grenfell Tower tragedy have fundamentally reshaped the regulatory landscape, critics have argued that they have too often barked louder than they have bitten. Remediation of unsafe buildings has progressed more slowly than anticipated. As at the end of August 2026, the Government estimated that 4,000 to 5,400 buildings 11 metres and over in height had yet to complete cladding remediation1. A key obstacle has been the difficulty in identifying responsible parties and enforcing responsibility for remediation works under the existing legal framework, often necessitating expensive and protracted litigation before remedial action could be secured.
Through the Remediation Bill, the Government seeks to deliver its Remediation Acceleration Plan by introducing new duties and enforcement powers aimed at accelerating remediation and strengthening accountability. In particular, the Remediation Bill seeks to:
- provide clarity regarding which buildings require cladding remediation and the standards that must be met;
- strengthen regulators' powers to compel those responsible for historic and ongoing building safety failures to take timely remedial action;
- require manufacturers of unsafe construction products to contribute towards remediation costs if their products have caused or contributed to building safety risks; and
- ensure that all residents have access to a remediation pathway, with the objective that "no building is left behind".
What are the key new provisions in the Remediation Bill?
The Remediation Bill represents a significant evolution of the building safety regime, shifting the focus from reactive enforcement mechanisms to proactive statutory duties to remediate unsafe cladding.
While the Building Safety Act 2022 (BSA) introduced wide-ranging reforms and strengthened protections for leaseholders, it has not secured timely remediation. The Remediation Bill seeks to close that gap through new remediation duties, greater transparency and enhanced enforcement powers. We summarise the key differences below.
| No. | BSA | The Remediation Bill |
|---|---|---|
| 1 | Creates rights, protections and enforcement mechanisms. | Will create direct legal obligations to assess and remediate. |
| 2 | Enforcement is through notices, orders and existing statutory powers. | Will introduce new criminal offences for remediation failures. |
| 3 | Focuses on leaseholder protection and cost recovery from developers. | Will focus on compelling remediation and holding blockers accountable. |
| 4 | Provides corporate liability tools (Remediation Contribution Orders, Building Liability Orders), which usually require tribunal or court intervention. | Will provide for direct regulatory penalties against responsible entities and, in some cases, parent/group companies. |
| 5 | No overarching statutory duty specifically requiring remediation of unsafe cladding. | Will create an express duty to remediate unsafe cladding. |
The Remediation Bill also proposes a number of significant reforms that are likely to give many stakeholders pause for thought:
- A new statutory duty to assess buildings – one of the most significant reforms is that responsible entities2 will be required to assess residential buildings of at least 11 metres (or at least five storeys) completed before 28 June 2022 for life-critical external wall fire safety risks, and commission Fire Risk Assessments of External Walls (FRAEWs) where appropriate.
- Standardisation of FRAEWs – the Remediation Bill, if enacted, will mandate the use of PAS 9980 methodology and will introduce compulsory auditing of FRAEWs by Homes England3 (referred to as “Homes and Communities Agency” in the Remediation Bill), to create greater consistency in identifying unsafe cladding and the remediation required.
- A legal duty to remediate unsafe cladding – the current regime contains mechanisms to compel remediation but no standalone statutory obligation to remediate unsafe cladding. The Remediation Bill, if enacted, will require responsible entities, including freeholders, head lessees, right-to-manage companies and resident management companies holding the relevant repairing obligation, to implement recommended interim measures and carry out remediation works “as soon as reasonably practicable”4. Failure to remediate would itself constitute a breach of statutory duty, rather than depending on enforcement notices and tribunal applications.
- Mandatory Remediation Compliance Plans – where remediation works are identified, responsible entities will be required to prepare and publish a Remediation Compliance Plan setting out the remediation strategy, key milestones and a delivery timetable, identifying the director responsible for compliance and disclosing beneficial ownership and corporate structure information. This would make unexplained delay more difficult.
- Beneficial ownership requirements and extended group company liability – complex ownership structures and special purpose vehicles are perceived to have hindered efforts to identify those ultimately responsible for affected buildings. The Remediation Bill seeks to address this by requiring greater transparency around beneficial ownership, corporate group structures and key decision-makers, enabling regulators to pursue those exercising real control over a building. Under the Remediation Bill, regulators would, in certain circumstances, be able to pursue parent companies and controlling group entities, which may become jointly liable for penalties. This builds on the BSA’s accountability measures and is intended to prevent corporate structuring from shielding those with ultimate control.
- A new register for medium-rise buildings – the Remediation Bill proposes a national register of residential buildings between 11 and 18 metres in height. Higher-risk buildings are already subject to extensive scrutiny, but visibility of affected medium-rise buildings is limited. The register is intended to show the full scale of the remediation challenge and ensure affected buildings are identified and assessed.
- Personal liability for directors – directors may face personal prosecution where a company’s breach results from their consent, connivance or neglect. Combined with the requirement to name a responsible director in the Remediation Compliance Plan, this will significantly raise the stakes for senior management and should keep remediation firmly on the board agenda.
- New criminal offences and sanctions – under the proposed changes failure to mitigate or remediate unsafe cladding may constitute a criminal offence unless the responsible entity can establish a reasonable excuse5. Regulators will be empowered to prosecute serious breaches, with sanctions including imprisonment for up to two years or fines of up to £500,000. Remediation would, if the Remediation Bill is enacted, become mandated.
- New offence of obstruction – unreasonably obstructing or delaying remediation, including refusing access for inspections or interview, delaying necessary approvals or raising unreasonable objections, will become an offence. Individuals may face fines of up to £40,000, and companies may be subject to turnover-linked penalties.
- Remediation Backstop and Remediation Management Orders – perhaps the most interventionist feature of the Remediation Bill is the creation of the Remediation Backstop, supported by a new regime of Remediation Management Orders (RMOs).
If responsible parties fail to progress remediation, a tribunal may grant an RMO allowing a remediation authority (which under the Remediation Bill is either Homes England or a local authority) to take control of the remediation process and carry out the works itself, recovering its costs (including administrative and legal costs) from those responsible. Such a power would significantly expand state intervention beyond merely compelling compliance.
For developers, landlords and investors, the risk goes beyond fines and prosecution: responsible entities may lose control of the remediation process altogether while remaining liable for its costs. This, if enacted, is a powerful incentive to act before regulators intervene. - Actions against manufacturers of defective construction products – the Remediation Bill proposes significant amendments to section 149 of the BSA6, broadening access to construction product claims and expanding the categories of parties entitled to bring them against manufacturers whose products contributed to building safety defects.
These amendments may prove one of the most commercially significant aspects of the Remediation Bill. Developers have so far borne a substantial proportion of remediation costs, whether through voluntary commitments, contractual obligations or statutory liabilities. The reforms are intended to shift more of that burden up the supply chain.
If widely used, the amendments could materially reallocate remediation risk across the industry. Developers may have enhanced opportunities to recover remediation expenditure, reducing their net exposure, while manufacturers of cladding systems, insulation products and other construction materials may face increased litigation risk. - Clarifying the scope of remediation remedies – the Remediation Bill, if enacted in its current form, would provide that the Limitation Act 1980 does not apply to applications for Remediation Orders (ROs), Remediation Contribution Orders (RCOs) and Building Liability Orders (BLOs) under the BSA, removing uncertainty as to whether they could become time-barred. However, it would not amend the limitation periods applicable to the underlying liabilities on which an RO, RCO or BLO depends, for example claims under the Defective Premises Act 1972 or section 149 of the BSA.
This may prove significant as ROs, RCOs and BLOs have become some of the most powerful tools for compelling remediation and recovering its costs, particularly where liability must be pursued beyond the immediate building owner.
For developers, landlords and their associated companies, this would potentially extend exposure to claims relating to historic building safety defects, subject to the 30-year ‘relevant defect’ window under the BSA and any limitation periods applicable to the liabilities underlying a BLO. For leaseholders, building owners and other claimants, it would remove limitation as a potentially significant barrier to applications for these orders.
For construction product manufacturers, the Remediation Bill, if enacted in its current form, would significantly increase litigation risk: it would broaden claims under section 149 of the BSA, permit BLOs to be made against associated companies in relation to those claims and give courts enhanced powers to order disclosure of product information. Combined with the disapplication of the Limitation Act 1980 to BLO applications, this could expose manufacturers and their wider corporate groups to increased long-tail remediation litigation, although the underlying section 149 claim would remain subject to its own limitation period.
What should you be doing ahead of Royal Assent?
The actions required will depend on where you sit in the industry, but developers, investors, funders, landlords, asset managers and freeholders should begin preparing now.
In particular, you should:
- Map your portfolio – identify every asset within scope, including medium-rise residential buildings with at least two dwellings measuring 11 to 18 metres (or five to seven storeys).
- Confirm the responsible entity – for each affected building, identify who holds the repairing obligation and fix any gaps in management or ownership structures.
- Audit existing FRAEWs – check that FRAEWs undertaken since 16 May 2022 follow PAS 9980 and flag any that may need updating.
- Quantify remediation exposure – list buildings needing investigation, interim measures or works, and assess the impact on programmes, funding and asset valuations.
- Appoint a responsible director – nominate a director accountable for compliance and put robust internal reporting and oversight in place.
- Compile ownership information – gather details of beneficial ownership, group structures and decision-makers ready for the transparency requirements.
- Preserve recovery claims – review historic projects and remediation spend to identify potential claims against manufacturers of defective construction products.
Those who start early will be better placed to comply, withstand regulatory scrutiny and avoid enforcement action once the legislation comes into force.
Final thought
The Remediation Bill has real bite. If enacted in its current form, it would replace a largely reactive regime with duties to remediate, backed by criminal sanctions, personal and group liability, and the threat of authorities taking over remediation altogether. The Limitation Act 1980 would no longer apply to applications for ROs, RCOs and BLOs (although the underlying liabilities would remain subject to their own limitation periods), and liability would move further up the supply chain.
The message is clear: those responsible for unsafe cladding should act now, or risk losing control of the process, and its costs, to someone else.
With thanks to Theodore Wilmot-Sitwell for his assistance in drafting this article.
Footnotes
-
See paragraph 1 of “Context” at page 9 of the Explanatory Notes to the Remediation Bill (see https://publications.parliament.uk/pa/bills/cbill/59-02/0155/en/260155en.pdf)
-
Pursuant to clause 42(1) of the Remediation Bill, a person is a “responsible entity” in relation to the external walls, or to a part of the external walls, of a relevant building if the person is required (a) under a lease; or (b) by virtue of an enactment, to repair or maintain those walls or that part.
-
Under the Remediation Bill, Homes England and the relevant local authority for the area in which a building is located will act as the designated remediation authorities. In that capacity, they will be responsible for administering the Remediation Backstop regime and may intervene where responsible parties fail to comply with their remediation obligations.
-
The Ministry of Housing, Communities and Local Government is expected to publish regulations and statutory guidance clarifying the meaning of remediation being carried out "as soon as reasonably practicable".
-
The Remediation Bill introduces a “reasonable excuse” defence to safeguard those who are acting in good faith and may be delayed by factors beyond their control.
-
Liability for past defaults relating to cladding products.